SCC2681AC1N40 Overview
There is a cost-effective PDIP package available for this product.The transmission of data takes place over 2 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.Configuration of this device involves 40 terminations.For its operation, it requires a supply voltage of 5V.Data is communicated via 2 serial I/Os.Electronic devices such as this are known as 40-pin integrated circuits.There is 4MHz clock frequency measured on this IC.UART is recommended that the operating temperature does not exceed 0°C to ensure long-term, normal performance.Ideally, the operating temperature should not exceed 70°C in order to ensure long-term performance.The configuration of this device is based on the 40 pins.The mount is done using Through Hole.UART is possible to ensure reliabilUARTy when the supply voltage is kept below 5.25V.When the supply voltage is kept above 4.75V, reliability can be ensured.When power supplies are provided of 5V, it is reliable and efficient for electronic designers.In order for the device to operate efficiently, 5V is the supply voltage.
SCC2681AC1N40 Features
2 serial I/Os
Clock frequency of 4MHz
Power supplies of 5V
Operating supply voltage of 5V

SCC2681AC1N40 Applications
There are a lot of NXP Semiconductors / Freescale
SCC2681AC1N40 UARTs applications.

Battery Operated Electronics
Handheld Terminal
Personal Digital Assistants
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules

Mount	Through Hole
Package / Case	PDIP
Number of Pins	40
JESD-609 Code	e2
Pbfree Code	yes
Number of Terminations	40
Terminal Finish	Tin/Silver (Sn/Ag)
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Terminal Position	DUAL
Supply Voltage	5V
Pin Count	40
Operating Supply Voltage	5V
Power Supplies	5V
Temperature Grade	COMMERCIAL
Number of Channels	2
Max Supply Voltage	5.25V
Min Supply Voltage	4.75V
Nominal Supply Current	10mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	4MHz
Data Rate	115 kbps
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	NO
External Data Bus Width	8
Number of Serial I/Os	2
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
Height Seated (Max)	4.7mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free