SI5350C-A-GM Overview
As a clock IC, it is packaged by the Tray method. The 20-VFQFN Exposed Pad package embeds this Clock PLL. As you can see, it consists of 20 terminations. Basically, this time clock generator needs a voltage of 2.5V. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 160MHz maximum. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.25V~3.63V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with LVCMOS logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. Microprocessor-specific clock PLL with 20 bits. The related electronic parts of part number SI5350 are listed below. There are 20 pins that are available on the frequency generator. Time clock generator can handle a voltage of 3.3V as the supply voltage. CAN ALSO OPERATE AT 3.3V SUPPLY is included in this frequency generator to enhance clock signal output. There is an electronic part in this series that belongs to the MultiSynth™ family. The output frequency can be magnified as high as possible with the assistance of 8 signal outputs. For its full function, a supply current of 25mA is required. I have designed a clock PLL with 2 elements and low jitter performance.
SI5350C-A-GM Features
Available in the 20-VFQFN Exposed Pad
Supply voltage of 2.5V
Operating supply voltage of 3.3V

SI5350C-A-GM Applications
There are a lot of Silicon Labs
SI5350C-A-GM Clock Generators applications.

Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment

Factory Lead Time	4 Weeks
Mounting Type	Surface Mount
Package / Case	20-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	20
Weight	42.467586mg
Operating Temperature	-40°C~85°C
Packaging	Tray
Series	MultiSynth™
Published	1997
Part Status	Discontinued
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	20
ECCN Code	EAR99
Type	Clock Generator
Additional Feature	CAN ALSO OPERATE AT 3.3V SUPPLY
Voltage - Supply	2.25V~3.63V
Terminal Position	QUAD
Terminal Form	NO LEAD
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Base Part Number	SI5350
Output	LVCMOS
Pin Count	20
Number of Outputs	8
Qualification Status	Not Qualified
Operating Supply Voltage	3.3V
Number of Elements	2
Number of Circuits	1
Operating Supply Current	25mA
Nominal Supply Current	45mA
Frequency (Max)	160MHz
Input	Crystal
Ratio - Input:Output	1:8
Primary Clock/Crystal Frequency-Nom	27MHz
PLL	Yes
Differential - Input:Output	No/No
Divider/Multiplier	Yes/No
Length	4mm
Height Seated (Max)	0.9mm
Width	4mm
RoHS Status	RoHS Compliant