SI5351A-B04486-GT Overview
As a clock IC, it is packaged by the Tube method. The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package embeds this Clock PLL. There is a Clock PLL called Clock, Crystal which is designed to be the input to this clock generator. Using 2 circuits, the electronic part's full performance can be accessed. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 2.25V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C TA. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, HCSL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Generator component. There are 10 pins that are available on the clock PLL. The output frequency can be magnified as high as possible with the assistance of 3 signal outputs. High efficiency is achieved when operating at a frequency of 200MHz.
SI5351A-B04486-GT Features
Available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

SI5351A-B04486-GT Applications
There are a lot of Silicon Labs
SI5351A-B04486-GT Clock Generators applications.

Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
Medical equipment

Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
Part Status	Active
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Type	Clock Generator
Voltage - Supply	2.25V~3.6V
Frequency	200MHz
Output	CMOS, HCSL
Number of Outputs	3
Number of Circuits	2
Input	Clock, Crystal
Ratio - Input:Output	1:3
PLL	Yes
Differential - Input:Output	No/No
Divider/Multiplier	Yes/No
REACH SVHC	Unknown
RoHS Status	RoHS Compliant