SN74GTLPH306DWG4 Overview
Embedded in the SOIC package, it is now available to you.Usually, when a transmission line is terminated, there are 24 termination points used.In order to power the device, a voltage supply of 3.3V is required.The pin count of this device is 24.The pin configuration of the device is 24.Electronic parts are designed with a number of bits of 8.3.45V is the maximum supply voltage it can handle.There is a minimum supply voltage of 3.15V for it.Level translators has been mounted wLevel translatorsh the method of Surface Mount.1 is the number of channels available in the system.As for the logic IC it uses, it is a BUS TRANSCEIVER.Typically, 2 transmission lines are terminated with an impedance-matching device that matches the characteristic impedance of the line.Despite the fact that it is an electronic device, it belongs to the GTLP family.The reliability of this device indicates its suitability for TUBE as a result of its reliable performance.If the supply voltage is kept at 3.3V, a high level of efficiency can be achieved.A temperature of at least [0°C] should be used for the operation.Lower than 85°C is the recommended operating temperature.Level shifter offers maximum design flexibilLevel shiftery wLevel shifterh 50mA output current.There can be only 175MHz frequency achieved.
SN74GTLPH306DWG4 Features
SOIC package
24 pin count
24 pins

SN74GTLPH306DWG4 Applications
There are a lot of Texas Instruments
SN74GTLPH306DWG4 voltage translators & level shifters applications.

SDIO
UART
I2C
Automotive
Personal computing
Automotive infotainment
Advanced Driver Assistance System (ADAS)
Telematics
Handset
Smartphone

Mount	Surface Mount
Package / Case	SOIC
Number of Pins	24
Weight	624.398247mg
JESD-609 Code	e4
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Packing Method	TUBE
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Frequency	175MHz
Pin Count	24
Operating Supply Voltage	3.3V
Polarity	Non-Inverting
Temperature Grade	INDUSTRIAL
Number of Channels	1
Max Supply Voltage	3.45V
Min Supply Voltage	3.15V
Number of Ports	2
Nominal Supply Current	20mA
Current - Output	50mA
Number of Bits	8
Propagation Delay	7.5 ns
Turn On Delay Time	7.5 ns
Family	GTLP
Logic Function	Transceiver, Translator
Direction	Bidirectional
Output Characteristics	3-STATE
Logic IC Type	BUS TRANSCEIVER
Max I(ol)	0.05 A
Control Type	COMMON CONTROL
Translation	GTL/P & LVTTL
Height Seated (Max)	2.65mm
Width	7.5mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead