SN74LVCC3245APWTE4 Overview
There is an embedded version of it in package TSSOP.Tape and Reel is the packaging method.This output uses Voltage.0 terminations are used to end transmission lines.There is a voltage supply of 3.3V which powers the device.With 24 pins, it is equipped with a minimal number of connections.With 24 pins, it is designed.Level translators is designed wLevel translatorsh 8 bLevel translatorss.Voltages up to 5.5V can be supplied.A minimal voltage of 2.3V is needed to operate it.Surface Mount is used for mounting.In this case, the logic IC is BUS TRANSCEIVER.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.LVC/LCX/Z is the family name of this electronic device.There are no external factors that affect it, so it consumes 80μA quiescent current.3.3V power supplies are required to run it.In addition, it is characterized by ALSO REQUIRES 3V TO 5.5V SUPPLY FOR PORT B.Temperatures higher than -40°C should be used for operation.Operating temperatures should be below 85°C.A total of 1 elements make up this object.In addition to its maximum design flexibility, 24mA features the lowest output current.
SN74LVCC3245APWTE4 Features
TSSOP package
24 pin count
24 pins
3.3V power supplies
1 elements

SN74LVCC3245APWTE4 Applications
There are a lot of Texas Instruments
SN74LVCC3245APWTE4 voltage translators & level shifters applications.

Telecom
GPIO
MDIO
PMBus
SMBus
SDIO
UART
I2C
Automotive
Personal computing

Mount	Surface Mount
Package / Case	TSSOP
Number of Pins	24
Weight	89.499445mg
Packaging	Tape and Reel
JESD-609 Code	e4
Pbfree Code	yes
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Additional Feature	ALSO REQUIRES 3V TO 5.5V SUPPLY FOR PORT B
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Terminal Pitch	0.65mm
Pin Count	24
Output Type	Voltage
Number of Elements	1
Polarity	Non-Inverting
Power Supplies	3.3V
Temperature Grade	INDUSTRIAL
Max Supply Voltage	5.5V
Min Supply Voltage	2.3V
Number of Ports	2
Current - Output	24mA
Number of Bits	8
Propagation Delay	14.5 ns
Quiescent Current	80μA
Turn On Delay Time	2.4 ns
Family	LVC/LCX/Z
Logic Function	Transceiver, Translator
Data Rate	200 Mbps
Direction	Bidirectional
Output Characteristics	3-STATE
Logic IC Type	BUS TRANSCEIVER
Prop. Delay@Nom-Sup	7.6 ns
High Level Output Current	-24mA
Low Level Output Current	24mA
Control Type	COMMON CONTROL
Translation	3V & 3/5V
Width	4.4mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Contains Lead