The STM32F103ZFH6 incorporates the high-performance ARM Cortex -M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 1 Mbyte and SRAM up to 96 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, ten general-purpose 16-bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, a USB, and a CAN. The STM32F103ZFH6 XL-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes allows for the design of low-power applications. These features make the STM32F103ZFH6 high-density performance line microcontroller family suitable for a wide range of applications such as motor drives, application control, medical and handheld equipment, PC and gaming peripherals, GPS platforms, industrial applications, PLCs, inverters, printers, scanners, alarm systems, and video intercom.

• Memories

  
  

• 96 Kbytes of SRAM

  
  

• 4-to-16 MHz crystal oscillator

  
  

• Internal 8 MHz factory-trimmed RC

  
  

• Internal 40 kHz RC with calibration

  
  

• Clock, reset and supply management

  
  

• 768 Kbytes to 1 Mbyte of Flash memory

  
  

• 2.0 to 3.6 V application supply and I/Os

  
  

• LCD parallel interface, 8080/6800 modes

  
  

• 32 kHz oscillator for RTC with calibration

  
  

• Core: ARM? 32-bit Cortex? -M3 CPU with MPU

  
  

• Single-cycle multiplication and hardware division

  
  

• POR, PDR, and programmable voltage detector (PVD)

  
  

• 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access

  
  

• Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories

  
  

  
  

  
  

  STM32F103ZFH6 Applications

  
  

  • Automotive 

    
    

  • Enterprise systems 

    
    

  • Personal electronics

    
    

    
    

    Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
    Factory Lead Time	10 Weeks
    Mounting Type	Surface Mount
    Package / Case	144-LFBGA
    Surface Mount	YES
    Number of Pins	144
    Operating Temperature	-40°C~85°C TA
    Packaging	Tray
    Series	STM32F1
    Part Status	Active
    Moisture Sensitivity Level (MSL)	3 (168 Hours)
    Number of Terminations	144
    Terminal Position	BOTTOM
    Terminal Form	BALL
    Supply Voltage	3.3V
    Terminal Pitch	0.8mm
    Frequency	72MHz
    Base Part Number	STM32F103
    Pin Count	144
    Supply Voltage-Min (Vsup)	2V
    Interface	CAN, I2C, IrDA, LIN, SPI, UART, USART, USB
    Memory Size	768kB
    Oscillator Type	Internal
    Number of I/O	112
    RAM Size	96K x 8
    Voltage - Supply (Vcc/Vdd)	2V~3.6V
    uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC
    Core Processor	ARM® Cortex®-M3
    Peripherals	DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT
    Program Memory Type	FLASH
    Core Size	32-Bit
    Program Memory Size	768KB 768K x 8
    Connectivity	CANbus, I2C, IrDA, LINbus, SPI, UART/USART, USB
    Bit Size	32
    Data Converter	A/D 21x12b; D/A 2x12b
    Watchdog Timer	Yes
    Has ADC	YES
    DMA Channels	YES
    Data Bus Width	32b
    Number of Timers/Counters	14
    Core Architecture	ARM
    Number of ADC Channels	16
    Number of PWM Channels	6
    Number of I2C Channels	2
    Number of SPI Channels	3
    Number of USB Channels	1
    Height	1.7mm
    Length	10.15mm
    Width	10.15mm
    REACH SVHC	No SVHC
    Radiation Hardening	No
    RoHS Status	ROHS3 Compliant
    Lead Free	Lead Free