The STM32F205RGT7 is a Arm?-based 32-bit MCU, 150 DMIPs, up to 1 MB Flash/128+4KB RAM, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces and camera. The high-performance Arm? Cortex?-M3 32-bit RISC CPU that runs at a frequency of up to 120 MHz serves as the foundation for the STM32F20x family. The family has a wide range of upgraded I/Os and peripherals connected to two APB buses, three AHB buses, and a 32-bit multi-AHB bus matrix, along with high-speed embedded memories (Flash memory up to 1 Mbyte, up to 128 Kbytes of system SRAM, up to 4 Kbytes of backup SRAM).

The devices additionally include an adaptive real-time memory accelerator (ART Accelerator?), which enables program execution from Flash memory with performance similar to zero wait states at CPU frequencies up to 120 MHz. The CoreMark? benchmark has been used to certify this performance.

All of the devices feature two general-purpose 32-bit timers, three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers, and two PWM timers for motor control. a real random number generator (RNG). They also have both conventional and cutting-edge communication interfaces. An SDIO, an improved Flexible Static Memory Control (FSMC) interface (for devices sold in packages of 100 pins and more), and a camera interface for CMOS sensors are examples of new sophisticated peripherals. Standard peripherals are also included with the devices.

• Clock, reset and supply management

  
  

  – From 1.8 to 3.6 V application supply + I/Os

  – POR, PDR, PVD and BOR

  – 4 to 26 MHz crystal oscillator

  – Internal 16 MHz factory-trimmed RC

  – 32 kHz oscillator for RTC with calibration

  – Internal 32 kHz RC with calibration

  • Low-power modes

    
    

    – Sleep, Stop and Standby modes

    – VBAT supply for RTC, 20 × 32 bit backup registers, and optional 4 Kbytes backup SRAM

    • 3 × 12-bit, 0.5 μs ADCs with up to 24 channels and up to 6 MSPS in triple interleaved mode

      
      

    • 2 × 12-bit D/A converters

      
      

    • Core: Arm? 32-bit Cortex?-M3 CPU (120 MHz max) with Adaptive real-time accelerator (ART Accelerator?) allowing 0-wait state execution performance from Flash memory, MPU, 150 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1)

      
      

    • Memories

      
      

      – Up to 1 Mbyte of Flash memory

      – 512 bytes of OTP memory

      – Up to 128 + 4 Kbytes of SRAM

      – Flexible static memory controller that supports Compact Flash, SRAM, PSRAM, NOR and NAND memories

      – LCD parallel interface, 8080/6800 modes

      
      

      
      

      STM32F205RGT7 Applications

      
      

      • Printers, and scanners

        
        

      • Alarm systems, video intercom, and HVAC

        
        

      • Home audio appliances

        
        

      • Motor drive and application control

        
        

      • Medical equipment

        
        

      • Industrial applications: PLC, inverters, circuit breakers

        
        

        
        

        Lifecycle Status	ACTIVE (Last Updated: 6 months ago)
        Factory Lead Time	12 Weeks
        Mounting Type	Surface Mount
        Package / Case	64-LQFP
        Surface Mount	YES
        Number of Pins	64
        Operating Temperature	-40°C~105°C TA
        Packaging	Tray
        Series	STM32F2
        Part Status	Active
        Moisture Sensitivity Level (MSL)	3 (168 Hours)
        Number of Terminations	64
        Max Power Dissipation	444mW
        Terminal Position	QUAD
        Terminal Form	GULL WING
        Peak Reflow Temperature (Cel)	NOT SPECIFIED
        Supply Voltage	3.3V
        Terminal Pitch	0.5mm
        Frequency	120MHz
        Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
        Base Part Number	STM32F205
        Pin Count	64
        Qualification Status	Not Qualified
        Supply Voltage-Min (Vsup)	1.8V
        Interface	CAN, I2C, I2S, IrDA, LIN, MMC, SPI, UART, USART, USB
        Memory Size	1MB
        Oscillator Type	Internal
        Number of I/O	51
        RAM Size	132K x 8
        Voltage - Supply (Vcc/Vdd)	1.8V~3.6V
        uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC
        Core Processor	ARM® Cortex®-M3
        Peripherals	Brown-out Detect/Reset, DMA, I2S, LCD, POR, PWM, WDT
        Program Memory Type	FLASH
        Core Size	32-Bit
        Program Memory Size	1MB 1M x 8
        Connectivity	CANbus, I2C, IrDA, LINbus, MMC, SPI, UART/USART, USB OTG
        Bit Size	32
        Data Converter	A/D 16x12b; D/A 2x12b
        Watchdog Timer	Yes
        Has ADC	YES
        DMA Channels	YES
        Data Bus Width	32b
        Number of Timers/Counters	14
        Core Architecture	ARM
        Number of UART Channels	2
        Number of ADC Channels	16
        Number of PWM Channels	6
        Number of I2C Channels	3
        Height	1.45mm
        Length	10.2mm
        Width	10.2mm
        REACH SVHC	No SVHC
        RoHS Status	ROHS3 Compliant
        Lead Free	Lead Free