TCA0372BDWR2G OverviewOp amp is packaged in 16-SOIC (0.295, 7.50mm Width) case. Op amps are General Purpose types of amplifier on the chip. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 16. Linear amplifier has a total of 16 pins. Please take in mind that op amp should be run at 15V. Linear amplifier includes 16 pins. Regarding input offset voltage, buffer amplifier rates 15mV voltage. Surface Mount is the recommended mounting type of operational amplifiers. With regard to operating temperature, op amp ranges -40°C~125°C. Operational amplifier can operate supply current at 8mA. The voltage gain should stay at 100dB. Instrumentation amplifier has 2 channels on it. The operating supply voltage of instrumentation amplifier is rated 20V voltage. It is used TAPE AND REEL to pack the op amps.
TCA0372BDWR2G Features16 Pins
supply voltage of 15V
100dB voltage gain
TCA0372BDWR2G ApplicationsThere are a lot of ON Semiconductor
TCA0372BDWR2G Instrumentational OP Amps applications.
Proportional operation circuits
Inverse/same-phase proportional circuit
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Packing Method | TAPE AND REEL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | TCA0372 |
| Pin Count | 16 |
| Operating Supply Voltage | 20V |
| Power Supplies | +-15V |
| Number of Channels | 2 |
| Operating Supply Current | 8mA |
| Nominal Supply Current | 5mA |
| Output Current | 1A |
| Slew Rate | 1.4V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 100nA |
| Voltage - Supply, Single/Dual (±) | 5V~40V ±2.5V~20V |
| Halogen Free | Halogen Free |
| Output Current per Channel | 1A |
| Input Offset Voltage (Vos) | 15mV |
| Bandwidth | 1.4MHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 1400 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.05μA |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 1mV |
| Nominal Gain Bandwidth Product | 1.4MHz |
| Length | 10.3mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TCA0372BDWR2G Datasheet
+8613715157867