THS4531AIDGK OverviewPackaged in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case, the buffer op amp is ready to use. An op amp ic of the Differential type. The op amp is delivered to you in a Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 2.7V battery. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 100μV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 250μA, this op amp ic can operate. 114dB should remain the voltage gain. During the manufacturing process, this buffer amplifier is divided into 1 circuits. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Differential, Rail-to-Rail signals. The operating supply voltage of the buffer op amp is rated at 5.5V.
THS4531AIDGK Features8 Pins
supply voltage of 2.7V
114dB voltage gain
Output Type: Differential, Rail-to-Rail
THS4531AIDGK ApplicationsThere are a lot of Texas Instruments
THS4531AIDGK Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | THS4531 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential, Rail-to-Rail |
| Operating Supply Voltage | 5.5V |
| Power Supplies | 2.7/5V |
| Number of Circuits | 1 |
| Operating Supply Current | 250μA |
| Output Current | 50mA |
| Supply Current-Max | 0.35mA |
| Slew Rate | 390V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 200nA |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 100μV |
| Unity Gain BW-Nom | 27000 kHz |
| Voltage Gain | 114dB |
| Average Bias Current-Max (IIB) | 0.25μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | YES |
| -3db Bandwidth | 2.7MHz |
| Bias Current-Max (IIB) @25C | 0.25μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 27MHz |
| Max I/O Voltage | 400μV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.05μA |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 970μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867