TS321AILT OverviewThere is a SC-74A, SOT-753 case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the General Purpose-type. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. We are approaching the 5h termination of the year. In total, there are 5 pins on this op amp ic. This linear amplifier should be powered by an 5V battery. 5 pins are located on the operational amplifiers. The input offset voltage is 2mV. This electrical part should be mounted using type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~125°C . The buffer amplifier is capable of operating from a supply current of 600μA . It is recommended to keep the voltage gain at 100dB at all times. On the buffer amps, there are 1 channels that can be used. The operating supply voltage of the buffer op amp is rated at 15V. This linear amplifier pack is based on the TAPE AND REEL axis.
TS321AILT Features5 Pins
supply voltage of 5V
100dB voltage gain
TS321AILT ApplicationsThere are a lot of STMicroelectronics
TS321AILT Instrumentational OP Amps applications.
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Factory Lead Time | 14 Weeks |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | SC-74A, SOT-753 |
Number of Pins | 5 |
Operating Temperature | -40°C~125°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 5 |
ECCN Code | EAR99 |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Packing Method | TAPE AND REEL |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | NOT SPECIFIED |
Number of Functions | 1 |
Supply Voltage | 5V |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
Base Part Number | TS321 |
Pin Count | 5 |
Qualification Status | Not Qualified |
Operating Supply Voltage | 15V |
Number of Channels | 1 |
Operating Supply Current | 600μA |
Nominal Supply Current | 800μA |
Output Current | 40mA |
Slew Rate | 0.4V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 65 dB |
Current - Input Bias | 20nA |
Voltage - Supply, Single/Dual (±) | 3V~30V ±1.5V~15V |
Output Current per Channel | 40mA |
Input Offset Voltage (Vos) | 2mV |
Bandwidth | 800 kHz |
Unity Gain BW-Nom | 800 kHz |
Voltage Gain | 100dB |
Average Bias Current-Max (IIB) | 0.2μA |
Low-Offset | NO |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 32V |
Voltage - Input Offset | 500μV |
Low-Bias | NO |
Micropower | NO |
Programmable Power | NO |
Dual Supply Voltage | 9V |
Power | NO |
Height | 1.3mm |
Length | 3mm |
Width | 1.75mm |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |