TL032CDR OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. J-FET-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 570μV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about 0°C~70°C . An 434μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 2 channels on the operational amplifiers. The instrumentation amplifier is packed in the form of TR.
TL032CDR Features8 Pins
supply voltage of 5V
81.58dB voltage gain
TL032CDR ApplicationsThere are a lot of Texas Instruments
TL032CDR Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
Factory Lead Time | 6 Weeks |
Contact Plating | Gold |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Surface Mount | YES |
Number of Pins | 8 |
Operating Temperature | 0°C~70°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Packing Method | TR |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 2 |
Supply Voltage | 5V |
Base Part Number | TL032 |
Pin Count | 8 |
Power Supplies | +-5/+-15V |
Number of Channels | 2 |
Operating Supply Current | 434μA |
Nominal Supply Current | 560μA |
Output Current | 40mA |
Slew Rate | 5.1V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | J-FET |
Common Mode Rejection Ratio | 70 dB |
Current - Input Bias | 2pA |
Voltage - Supply, Single/Dual (±) | 10V~30V ±5V~15V |
Output Current per Channel | 40mA |
Input Offset Voltage (Vos) | 570μV |
Bandwidth | 1.1MHz |
Neg Supply Voltage-Nom (Vsup) | -5V |
Unity Gain BW-Nom | 1100 kHz |
Voltage Gain | 81.58dB |
Average Bias Current-Max (IIB) | 0.0004μA |
Low-Offset | NO |
Frequency Compensation | YES |
Low-Bias | YES |
Micropower | YES |
Programmable Power | NO |
Dual Supply Voltage | 9V |
Nominal Gain Bandwidth Product | 1.1MHz |
Max I/O Voltage | 1.5mV |
Power | NO |
Input Offset Current-Max (IIO) | 0.0001μA |
Height | 1.75mm |
Length | 4.9mm |
Width | 3.91mm |
Thickness | 1.58mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |