TLV2241IDBVT OverviewA SC-74A, SOT-753 case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. It is estimated that there will be 5 terminations in the next few months. There are a total of 5 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 2.7V volts. There are 5 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 3mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . An 1μA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. There are 1 channels on the operational amplifiers. One of the advantages of this op amp is that it outputs Rail-to-Rail signals, which is one of its many advantages. The operating supply voltage of the buffer op amp is rated at 6V. The instrumentation amplifier is packed in the form of TR.
TLV2241IDBVT Features5 Pins
supply voltage of 2.7V
120dB voltage gain
Output Type: Rail-to-Rail
TLV2241IDBVT ApplicationsThere are a lot of Texas Instruments
TLV2241IDBVT Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.7V |
| Base Part Number | TLV2241 |
| Pin Count | 5 |
| Output Type | Rail-to-Rail |
| Operating Supply Voltage | 6V |
| Number of Channels | 1 |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1.25μA |
| Power Dissipation | 385mW |
| Output Current | 200μA |
| Slew Rate | 0.002V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 55 dB |
| Current - Input Bias | 100pA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12V ±1.25V~6V |
| Output Current per Channel | 200μA |
| Input Offset Voltage (Vos) | 3mV |
| Bandwidth | 5.5 kHz |
| Unity Gain BW-Nom | 5.5 kHz |
| Voltage Gain | 120dB |
| Power Supply Rejection Ratio (PSRR) | 70dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 600μV |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 5.5 kHz |
| Max I/O Voltage | 3mV |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TLV2241IDBVT Datasheet
+8613715157867