TL16PC564BGGM OverviewIn order to make it more cost-effective, this product is also available in a package of 100-LFBGA.The transmission of information is carried out through 1, UART channels.When UART comes to packaging, Tube is adopted as the packaging method.There is an uPs/uCs/Peripheral ICs type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL which is used for it.In order to configure this device, 100 terminations are used.In order for it to operate, a voltage of 5V must be provided.At present, this electronic part is in the state of Obsolete.Data communication is supported by 1 serial I/Os.Mounting is done through Surface Mount.UART operates on a voltage of 3V~3.6V.This electronic device belongs to the 100-pin IC family.In this IC, the clock frequency is 60MHz.For a long-term satisfactory performance, it is necessary not to exceed the operating temperature of 0°C.The operating temperature should be in excess of 70°C to ensure the normal work for a long time.The 100 pins are at the core of the device's configuration.The device is mounted in accordance with Surface Mount.Its high-efficiency operation relies on a voltage of 5V.Furthermore, it was shown to be capable of performing ALSO OPERATES AT 3.3V SUPPLY.There is a default setting for the base part number of the part to be TL16PC564.
TL16PC564BGGM Features1 serial I/Os
Clock frequency of 60MHz
Operating supply voltage of 5V
ALSO OPERATES AT 3.3V SUPPLY
TL16PC564BGGM ApplicationsThere are a lot of Texas Instruments
TL16PC564BGGM UARTs applications.
Cellular Phones DataPort
Wireless Infrared Data Communications Systems
Handheld Terminals and Tablets
Handheld Computers
Wireless Portable Point-of-Sale Terminals
GPS Devices
Personal Digital Assistants Modules
Battery Operated Instruments
Multimedia Systems
Serial to Parallel/Parallel to Serial Converter
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LFBGA |
| Number of Pins | 100 |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ALSO OPERATES AT 3.3V SUPPLY |
| HTS Code | 8542.31.00.01 |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TL16PC564 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Number of Channels | 1, UART |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 60MHz |
| Data Rate | 1 Mbps |
| Address Bus Width | 10 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 1 |
| Bus Compatibility | PCMCIA |
| Data Transfer Rate-Max | 0.0140380859375 MBps |
| Communication Protocol | ASYNC, BIT |
| FIFO's | 64 Byte |
| With Modem Control | Yes |
| Length | 10mm |
| Height Seated (Max) | 1.4mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Surface Mount | YES |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Terminal Finish | TIN LEAD |
| Peak Reflow Temperature (Cel) | 220 |
| Reach Compliance Code | unknown |
| JESD-30 Code | S-PBGA-B100 |
| Qualification Status | COMMERCIAL |
| Operating Temperature (Max) | 70°C |
| RoHS Status | Non-RoHS Compliant |
TL16PC564BGGM Datasheet
+8613715157867