TSV911AILT OverviewPackaged in a SC-74A, SOT-753 case, the buffer op amp is ready to use. An op amp ic of the General Purpose type. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 5. The pins on this board total to 5 in total. I would like to remind you that this buffer op amp should be powered by an 3.3V battery. A total of 5 pins are present on the instrumentation amplifier. There is an input offset voltage of 1.5mV for this buffer op amp. The mounting type that is recommended for this electrical part is Surface Mount. In relation to the operating temperature of this buffer op amp, it works well at an average of -40°C~125°C . As long as the supply current of the chip does not exceed 820μA, this op amp ic can operate. 91dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. For packing the buffer amplifier, the TAPE AND REEL-axis is adopted.
TSV911AILT Features5 Pins
supply voltage of 3.3V
91dB voltage gain
Output Type: Rail-to-Rail
TSV911AILT ApplicationsThere are a lot of STMicroelectronics
TSV911AILT Instrumentational OP Amps applications.
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
Factory Lead Time | 14 Weeks |
Contact Plating | Gold |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | SC-74A, SOT-753 |
Number of Pins | 5 |
Operating Temperature | -40°C~125°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e3 |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 5 |
ECCN Code | EAR99 |
Terminal Finish | Matte Tin (Sn) - annealed |
Packing Method | TAPE AND REEL |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Number of Functions | 1 |
Supply Voltage | 3.3V |
Base Part Number | TSV911 |
Pin Count | 5 |
Output Type | Rail-to-Rail |
Number of Channels | 1 |
Operating Supply Current | 820μA |
Nominal Supply Current | 1.1mA |
Output Current | 35mA |
Slew Rate | 4.5V/μs |
Architecture | VOLTAGE-FEEDBACK |
Amplifier Type | General Purpose |
Common Mode Rejection Ratio | 62 dB |
Current - Input Bias | 1pA |
Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
Output Current per Channel | 35mA |
Input Offset Voltage (Vos) | 1.5mV |
Bandwidth | 8MHz |
Unity Gain BW-Nom | 8000 kHz |
Voltage Gain | 91dB |
Low-Offset | NO |
Frequency Compensation | YES |
Supply Voltage Limit-Max | 6V |
Low-Bias | YES |
Micropower | NO |
Programmable Power | NO |
Power | NO |
Height | 1.3mm |
Length | 3mm |
Width | 1.75mm |
REACH SVHC | No SVHC |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |