AD623ARZ-R7 OverviewIn order to protect the op amps, a 8-SOIC (0.154, 3.90mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 5V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 25μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 550μA and 10 . As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. As a whole, there are 1 elements that make up this buffer amplifier. A minimum voltage gain of 1 is the minimum voltage gain that this instrumentation amplifier is capable of producing. It is important to keep the resistance within the 2GOhm range of the op amps.
AD623ARZ-R7 Features8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail
Resistance of 2GOhm
AD623ARZ-R7 ApplicationsThere are a lot of Analog Devices Inc.
AD623ARZ-R7 Instrumentational OP Amps applications.
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
Factory Lead Time | 8 Weeks |
Contact Plating | Tin |
Mount | Surface Mount |
Mounting Type | Surface Mount |
Package / Case | 8-SOIC (0.154, 3.90mm Width) |
Number of Pins | 8 |
Weight | 540.001716mg |
Operating Temperature | -40°C~85°C |
Packaging | Tape & Reel (TR) |
JESD-609 Code | e3 |
Pbfree Code | no |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 8 |
ECCN Code | EAR99 |
Resistance | 2GOhm |
Max Power Dissipation | 650mW |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Number of Functions | 1 |
Supply Voltage | 5V |
Time@Peak Reflow Temperature-Max (s) | 30 |
Base Part Number | AD623 |
Pin Count | 8 |
Output Type | Rail-to-Rail |
Number of Elements | 1 |
Power Supplies | 5V |
Operating Supply Current | 550μA |
Power Dissipation | 650mW |
Supply Current-Max | 0.625mA |
Slew Rate | 0.3V/μs |
Amplifier Type | Instrumentation |
Common Mode Rejection Ratio | 90 dB |
Current - Input Bias | 17nA |
Voltage - Supply, Single/Dual (±) | 2.7V~12V ± 2.5V~6V |
Input Offset Voltage (Vos) | 25μV |
Gain Bandwidth Product | 800 kHz |
Neg Supply Voltage-Nom (Vsup) | -5V |
Average Bias Current-Max (IIB) | 0.0275μA |
Power Supply Rejection Ratio (PSRR) | 80dB |
Supply Voltage Limit-Max | 6V |
Voltage - Input Offset | 25μV |
-3db Bandwidth | 0.8MHz |
Neg Supply Voltage-Max (Vsup) | -6V |
Input Offset Current-Max (IIO) | 0.0025μA |
Voltage Gain-Min | 1 |
Length | 4.9mm |
Radiation Hardening | No |
RoHS Status | ROHS3 Compliant |
Lead Free | Contains Lead |