AD5122ABRUZ100 Overview
There are 16-TSSOP (0.173, 4.40mm Width) packages in this package.Non-Volatile is the point at which this pentometer starts to be stored.This digital potentiometer has 2 embedded circuits.Tube package provides access to it.To protect this pentometer from overcurrent, there are 128 taps.Positions 128 make up this pentometer.Digital potentiometer is designed wdigital potentiometerh terminations of 16.Listed below are 1 functions included in this programmable potentiometer.Its total resistance will be 100000Ohm.The performance of 2.5V is provided by 2.5V.In the digi devices, 16 pins can be seen.The mounting direction should be Surface Mount.It is possible for the potentionmeter to supply voltages of 2.3V~5.5V ±2.25V~2.75V.In this digital potentiometer, the temperature range is -40°C~125°C.There is a possibility of limiting the flow by 100kOhm.The AD5122 family contains pentometer.By Surface Mount, digital potentiometer is mounted.There are 16 pins on this potentiameter.When using this digital variable resistor, Selectable Address can be found.At 5.5V, the potentiometer conducts.Here are some additional features of this digital potentiometer: REST RESISTOR VALUES IS 10000OHM AND CONTROL INTERFACE IS INCREMENT/DECREMENTIn order for it to function properly, the supply current must be operated at 700nA.Supply currents up to 32μA are supported.Data transfers are limited to 3MHz bandwidth.Make sure the dual supply voltage on this pentometer is 2.75V.In order to maintain stable power, pentometer runs dual supply voltage up to 2.25V volts.
AD5122ABRUZ100 Features
Available in 16-TSSOP (0.173, 4.40mm Width) package
2 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~125°C
16 pins
Operate supply voltage at the range of 5.5V

AD5122ABRUZ100 Applications
There are a lot of Analog Devices Inc.
AD5122ABRUZ100 Digital Potentiometers applications.

Modern office equipment
Industrial control
Medical equipment
Refrigerator
Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display

Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Factory Lead Time	8 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C
Packaging	Tube
Tolerance	±8%
JESD-609 Code	e3
Feature	Selectable Address
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Temperature Coefficient	35 ppm/°C
Resistance	100kOhm
Number of Positions	128
Additional Feature	REST RESISTOR VALUES IS 10000OHM AND CONTROL INTERFACE IS INCREMENT/DECREMENT
Voltage - Supply	2.3V~5.5V ±2.25V~2.75V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD5122
Pin Count	16
Operating Supply Voltage	5.5V
Configuration	Potentiometer
Interface	I2C
Number of Circuits	2
Operating Supply Current	700nA
Nominal Supply Current	700nA
Memory Type	Non-Volatile
Max Supply Current	32μA
Bandwidth	3 kHz
Taper	Linear
Max Dual Supply Voltage	2.75V
-3db Bandwidth	3MHz
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Negative Supply Voltage-Nom	-2.5V
Number of Taps	128
Total Resistance	100000Ohm
Resistance - Wiper (Ω) (Typ)	130
Height	1.05mm
Length	5.1mm
Width	4.5mm
REACH SVHC	No SVHC
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead