AD5251BRU100-RL7 Overview
This file is contained in a package of 14-TSSOP (0.173, 4.40mm Width).Non-Volatile starts the process of storing this pentometer.This digital potentiometer has 2 embedded circuits.For securing digital analogics, it is available in the Tape & Reel (TR) package.During overcurrent, this pentometer features 64 taps.Positions are 64.The terminations are set at 14.To provide you with some reference, this programmable potentiometer includes 2 functions.As shown, the speed potentiometers's resistance will be 100000Ohm.Performance is delivered by 2.5V power.The digi devices shows the 14 pins.The mount should be done in the direction of Surface Mount.It is possible to supply 2.7V~5.5V ±2.25V~2.75V volts to the potentionmeter.A digital potentiometer has a temperature range of -40°C~105°C.In this case, the flow can be limited by 100kOhm.AD5251 family member.Amount Surface Mount mounts the potentionmeter.The potentiameter has 14 pins.This digital variable resistor displays Selectable Address.A potentiometer conducts at a 2.75V supply voltage.There is a voltage delivery capability of 3/5V.Added features of this digital potentiometer include: NONVOLATILE MEMORY; DEVICE SUPPORTS DUAL SUPPLY OPERATIONEven at 400kHz frequencies, it can maintain a high degree of accuracy.Having a maximum supply current of 5μA, digital potentiometer is able to handle any load.There is a quiescent current consumption at 5μA.Conduct this pentometer at its max dual supply voltage of 0 volts.A dual-supply voltage can be set up to 2.25V in order to ensure stable power.
AD5251BRU100-RL7 Features
Available in 14-TSSOP (0.173, 4.40mm Width) package
2 Circuits
Mounting Type: Surface Mount
Operate temperature at the range of -40°C~105°C
14 pins
Operate supply voltage at the range of 2.75V
Quiescent Current at 5μA

AD5251BRU100-RL7 Applications
There are a lot of Analog Devices Inc.
AD5251BRU100-RL7 Digital Potentiometers applications.

Programmable computer
Power supply
Power meter
Automatic detection of equipment
Optic fiber network
Adjusting the LCD Display
Voltage control
Replaces mechanical potentiometers
Matching Linear Impedance
Adjust VCOM settings

Contact Plating	Lead, Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	-40°C~105°C
Packaging	Tape & Reel (TR)
Tolerance	±20%
JESD-609 Code	e0
Feature	Selectable Address
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Temperature Coefficient	600 ppm/°C
Resistance	100kOhm
Number of Positions	64
Terminal Finish	Tin/Lead (Sn85Pb15)
Additional Feature	NONVOLATILE MEMORY; DEVICE SUPPORTS DUAL SUPPLY OPERATION
Voltage - Supply	2.7V~5.5V ±2.25V~2.75V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	2
Supply Voltage	2.5V
Terminal Pitch	0.65mm
Reach Compliance Code	not_compliant
Frequency	400kHz
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD5251
Pin Count	14
Qualification Status	Not Qualified
Operating Supply Voltage	2.75V
Power Supplies	3/5V
Configuration	Potentiometer
Interface	I2C
Number of Circuits	2
Nominal Supply Current	3μA
Memory Type	Non-Volatile
Max Supply Current	5μA
Quiescent Current	5μA
Bandwidth	0.04 kHz
Taper	Linear
Max Dual Supply Voltage	2.75V
Min Dual Supply Voltage	2.25V
Dual Supply Voltage	2.5V
Negative Supply Voltage-Nom	-2.5V
Number of Taps	64
Total Resistance	100000Ohm
Resistance - Wiper (Ω) (Typ)	200
Temperature Coefficient (Typ)	650ppm/°C
Length	5mm
Width	4.4mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead