AD8278BRMZ Overview
In order to protect the op amps, a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used. There are two types of operational amplifiers in this circuit. In the case of Tube cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 8. It consists of a total of 8 pins in total. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. It has 8 pins that make up the linear amplifier. In terms of input offset voltage, operational amplifier rates 100μV. This electronic component is recommended to be mounted using the mounting type Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. In order for this instrumentation amplifier to operate, the supply current needs to be between 200μA and 10 . Buffer op amp is equipped with 1 channels on the device. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. It is important to keep the resistance within the 120kOhm range of the linear amplifier.
AD8278BRMZ Features
8 Pins
supply voltage of 15V
Output Type: Rail-to-Rail
Resistance of 120kOhm

AD8278BRMZ Applications
There are a lot of Analog Devices Inc.
AD8278BRMZ Instrumentational OP Amps applications.

Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification

Lifecycle Status	PRODUCTION (Last Updated: 3 weeks ago)
Factory Lead Time	8 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Resistance	120kOhm
Terminal Finish	Matte Tin (Sn)
Max Power Dissipation	500μW
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	AD8278
Pin Count	8
Qualification Status	Not Qualified
Output Type	Rail-to-Rail
Number of Channels	1
Operating Supply Current	200μA
Nominal Supply Current	200μA
Max Supply Current	400μA
Min Input Voltage	-1.5V
Slew Rate	1.4V/μs
Amplifier Type	Differential
Common Mode Rejection Ratio	80 dB
Max Input Voltage	1.5V
Voltage - Supply, Single/Dual (±)	2V~36V ±2V~18V
Output Current per Channel	15mA
Input Offset Voltage (Vos)	100μV
Bandwidth	1MHz
Neg Supply Voltage-Nom (Vsup)	-15V
Voltage - Input Offset	50μV
Settling Time	9 μs
-3db Bandwidth	0.55MHz
Height	950μm
Length	3.2mm
Width	3.2mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead