ADF4111BCPZ OverviewThe Tray method is used for packaging clock ICs. As part of the 20-WFQFN Exposed Pad, CSP package, this clock generator is embedded. This clock generator ic can sustain 260 degrees of temperature during reflowing. There are 20 terminations found in this file. To operate this time clock generator, 3V voltage should be applied. In this clock generator, CMOS, TTL is used as the input to the clock. An up to 1.4GHz frequency is provided by this clock-based RF synthesizer. The Surface Mount allows the electrical component to be installed conveniently on the panel. In order to maintain safety, this frequency generator should be supplied with voltages above 2.7V. In terms of supply voltage, RF synthesizer works with 2.7V~5.5V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The frequency synthesizer in this product is compatible with all levels of Clock logic. It has been classified as a Clock/Frequency Synthesizer (RF) electronic part, which means that it is a semiconductor. It is a 20-bit clock PLL designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number ADF4111. There are 20 pins on the frequency generators that are available for use. Supply voltage 5V is what clock generator can handle. There is a 6-BIT SWALLOW COUNTER feature on this frequency generator in order to produce a better clock signal. 1 signal outputs are provided for enhancing output frequency as much as possible. Using a frequency of 1.2GHz allows frequency synthesizer to achieve high efficiencies. In order for it to fully perform time clock generator's functions, it needs a supply current of 4.5mA. During these clock generator operations, the maximum current supplied reaches 5.5mA.
ADF4111BCPZ FeaturesAvailable in the 20-WFQFN Exposed Pad, CSP
Supply voltage of 3V
Operating supply voltage of 5V
ADF4111BCPZ ApplicationsThere are a lot of Analog Devices Inc.
ADF4111BCPZ Clock Generators applications.
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks
Line cards used in telephone exchange
Fiber Channel
PCI express cards
Infotainment systems
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad, CSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | Clock/Frequency Synthesizer (RF) |
| Additional Feature | 6-BIT SWALLOW COUNTER |
| Voltage - Supply | 2.7V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.2GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADF4111 |
| Output | Clock |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Operating Supply Current | 4.5mA |
| Nominal Supply Current | 4.5mA |
| Max Supply Current | 5.5mA |
| Frequency (Max) | 1.4GHz |
| Input | CMOS, TTL |
| Ratio - Input:Output | 2:1 |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Height | 830μm |
| Length | 4mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADF4111BCPZ Datasheet
+8613715157867