CDC391D Overview
16-SOIC (0.154, 3.90mm Width) case is available for the cut smart buffer. In case Tube, the cut smart buffer is available. A total of 16 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. If this is the case, it will be mounted as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution). If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 4.75V~5.25V volts. There is a place for it in the way of Surface Mount. On this board, there is a pin count of 16. In order for the timeing clock to operate, it is connected to the 16 pins. The structure belongs to the CDC391 family of structures. By default, the output of the circuit clock is set to 6. There is a 5V volt supply that powers the timeing clock. It is recommended that the supply voltage be kept at 5V for maximum efficiency. The clock divider consumes 40mA quiescent current and is unaffected by external factors. As long as the frequency is 100MHz, excellent accuracy can be achieved. This clock buffer is configured as a 1 bit device. It has 2 ports configured.
CDC391D Features
16 terminations
The operating temperature of -40°C~85°C degrees
at 100MHz frequency

CDC391D Applications
There are a lot of Texas Instruments
CDC391D Clock Buffers & Drivers applications.

Clock signal level shifting
High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication
Telecommunications
Computing