CDCV850IDGGRG4 Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. 48 terminations can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. LVTTL, SSTL-2 is designed as this clock generator's input. 1 circuits are implemented to access the electronic component's full performance. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 2.7V. The supply voltage for this frequency synthesizer should be kept above 2.3V for safety considerations. Clock PLL works with 2.3V~2.7V supply voltage provided. The ambient temperature should be set at -40°C~85°C, which is estimated by the test statistics. This is a clock generator compatible with SSTL-2 logic levels. This electronic component can be classified as a PLL Clock Driver. This clock-generating IC is a 48-bit device designed explicitly for microprocessors. According to the base part number CDCV850, its related parts can be found. There is an available 48 pin on the clock generators. RF synthesizers can handle voltages up to 2.5V. Clock PLL is facilitated with 10 signal outputs to magnify output frequency as high as possible. This clock generator offers low timing skew at 0.075 ns Max. You can find similar clock generators by searching for the 850 family. Frequency generator is able to reali140MHze high efficiency when operating at a frequency of 140MHz.
CDCV850IDGGRG4 Features
Available in the 48-TFSOP (0.240, 6.10mm Width)
Supply voltage of 2.5V
Operating supply voltage of 2.5V

CDCV850IDGGRG4 Applications
There are a lot of Texas Instruments
CDCV850IDGGRG4 Clock Generators applications.

Instrument
Automatic test equipment
Wide area power system
Digital circuits
Wireless base station for LTE, LTE-advanced
Picocells, femtocells and small cells
Sampling clocks for ADC and DAC
1 Gigabit Ethernet
10 Gigabit Ethernet
FPGA and processor clocks

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	48-TFSOP (0.240, 6.10mm Width)
Number of Pins	48
Weight	223.195796mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	48
Type	PLL Clock Driver
Voltage - Supply	2.3V~2.7V
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	2.5V
Terminal Pitch	0.5mm
Frequency	140MHz
Base Part Number	CDCV850
Output	SSTL-2
Pin Count	48
Number of Outputs	10
Operating Supply Voltage	2.5V
Supply Voltage-Max (Vsup)	2.7V
Power Supplies	2.52.5/3.3V
Supply Voltage-Min (Vsup)	2.3V
Number of Circuits	1
Nominal Supply Current	6mA
Family	850
Input	LVTTL, SSTL-2
Ratio - Input:Output	1:11
PLL	Yes with Bypass
Differential - Input:Output	Yes/Yes
Divider/Multiplier	No/No
Same Edge Skew-Max (tskwd)	0.075 ns
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead