INA117KU/2K5 OverviewA 8-SOIC (0.154, 3.90mm Width) case is used to package the op amp. Differential-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. It is estimated that there will be 8 terminations in the next few months. There are a total of 8 pins on this op amp. It is important to remember that this op amp should be operated at a voltage of 15V volts. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 2mV. It is recommended that this electronic component be mounted using the Surface Mount mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -40°C~85°C . There should be no change in the voltage gain. There are a total of 1 elements in this linear amplifier. The instrumentation amplifier is packed in the form of TR. As a recommendation, this electronic component should be used with a power supply that can deliver 1.5mA. There is a quiescent current of 2mA in this operational amplifier circuit. 800kOhm should be the range of resistance for the linear amplifier.
INA117KU/2K5 Features8 Pins
supply voltage of 15V
0dB voltage gain
Resistance of 800kOhm
INA117KU/2K5 ApplicationsThere are a lot of Texas Instruments
INA117KU/2K5 Instrumentational OP Amps applications.
Addition operation circuits
Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 75.891673mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 800kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Base Part Number | INA117 |
| Pin Count | 8 |
| Number of Elements | 1 |
| Nominal Supply Current | 2mA |
| Quiescent Current | 2mA |
| Current - Supply | 1.5mA |
| Min Input Voltage | -200V |
| Slew Rate | 2.6V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Differential |
| Common Mode Rejection Ratio | 70 dB |
| Max Input Voltage | 200V |
| Voltage - Supply, Single/Dual (±) | ±5V~18V |
| Input Offset Voltage (Vos) | 2mV |
| Bandwidth | 200 kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 0dB |
| Low-Offset | YES |
| Frequency Compensation | NO |
| Supply Voltage Limit-Max | 22V |
| Voltage - Input Offset | 600μV |
| Current - Output / Channel | 20mA |
| Micropower | NO |
| -3db Bandwidth | 0.2MHz |
| Programmable Power | NO |
| Dual Supply Voltage | 15V |
| Neg Supply Voltage-Max (Vsup) | -22V |
| Power | NO |
| Voltage Gain-Nom | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867