MC100EL14DW Overview
20-SOIC (0.295, 7.50mm Width) case is available for the cut smart buffer. In case Tube, the cut smart buffer is available. Normal operation has a maximum value of 1GHz. A total of 20 terminations have been found in it. The supply voltage of 5V is capable of providing high efficiency. If this is the case, it will be mounted as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 4.2V~5.7V volts. On this board, there is a pin count of 20. Buffer IC is ECL, PECL that is output. This value is set to 5.7V for the maximum available supply voltage (Vsup). A voltage higher than 4.2V is necessary for normal operation of the system. In this case, the electronic part belongs to the 100EL series. With the help of this gadget, it is also possible to obtain NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V.
MC100EL14DW Features
20 terminations
The operating temperature of -40°C~85°C degrees

MC100EL14DW Applications
There are a lot of Rochester Electronics, LLC
MC100EL14DW Clock Buffers & Drivers applications.

Clock signal level shifting
High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication
Telecommunications
Computing

Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C
Packaging	Tube
Series	100EL
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	20
Type	Fanout Buffer (Distribution), Multiplexer
Terminal Finish	TIN LEAD
Additional Feature	NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Voltage - Supply	4.2V~5.7V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Time@Peak Reflow Temperature-Max (s)	30
Output	ECL, PECL
Pin Count	20
JESD-30 Code	R-PDSO-G20
Qualification Status	COMMERCIAL
Supply Voltage-Max (Vsup)	5.7V
Supply Voltage-Min (Vsup)	4.2V
Number of Circuits	1
Frequency (Max)	1GHz
Input	ECL, PECL
Ratio - Input:Output	2:5
Differential - Input:Output	Yes/Yes
Propagation Delay (tpd)	0.83 ns
Same Edge Skew-Max (tskwd)	0.05 ns
Height Seated (Max)	2.65mm
Width	7.5mm
RoHS Status	Non-RoHS Compliant
Mount	Surface Mount
Published	2006
Terminal Finish	Tin/Lead (Sn80Pb20)
Reach Compliance Code	not_compliant
Base Part Number	MC100EL14
Qualification Status	Not Qualified
Power Supplies	-4.2/-5.5V
Prop. Delay@Nom-Sup	0.88 ns
Lead Free	Contains Lead