MC10E211FNR2 Overview
There is a case available for the cut smart buffer in 28-LCC (J-Lead). This package is packaged in the form of a Tape & Reel (TR). For normal operation, 700MHz is the maximum value. It has 28 terminations in it, which means that it is terminated. Supply voltages of 5V are capable of achieving high efficiency. In this case, it will be mounted by Surface Mount. A classification of Fanout Buffer (Distribution), Multiplexer is assigned to this electronic part. Setting the temperature to 0°C~85°C will ensure reliable performance. Ideally, it should be able to operate from 4.2V~5.7V volts. It has been positioned in the way of Surface Mount. There are 28 pins on the clock buffer. There is a value of ECL, PECL as the output. During operation, 28 pins are used. As a member of the MC10E211 family, it falls under that category. A member of the 10E family, this clock buffer is a digital camera. Vsup is set to 5.7V as the maximum supply voltage. As a general rule, the supply voltage (Vsup) should be maintained above 4.2V. The timeing clock is powered by a power supply of -5.2V volts. A electronic part of this series belongs to the 10E family. By utilizing this gadget, one can also obtain NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V.
MC10E211FNR2 Features
28 terminations
The operating temperature of 0°C~85°C degrees

MC10E211FNR2 Applications
There are a lot of ON Semiconductor
MC10E211FNR2 Clock Buffers & Drivers applications.

Clock signal format conversion
Clock signal level shifting
High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication
Telecommunications

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	0°C~85°C
Packaging	Tape & Reel (TR)
Series	10E
Published	2006
JESD-609 Code	e0
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
Type	Fanout Buffer (Distribution), Multiplexer
Terminal Finish	Tin/Lead (Sn/Pb)
Additional Feature	NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V
Voltage - Supply	4.2V~5.7V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	240
Number of Functions	1
Supply Voltage	5V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MC10E211
Output	ECL, PECL
Pin Count	28
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.7V
Power Supplies	-5.2V
Supply Voltage-Min (Vsup)	4.2V
Number of Circuits	1
Frequency (Max)	700MHz
Family	10E
Input	ECL, PECL
Ratio - Input:Output	2:6
Differential - Input:Output	Yes/Yes
Same Edge Skew-Max (tskwd)	0.075 ns
Height Seated (Max)	4.57mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead