MC10E411FNR2G Overview
There is a case option of 28-LCC (J-Lead) available for this clock divider. There is a Tape & Reel (TR) packaged with it. Normal operation is limited to 700MHz. 28 terminations have been recorded. With a supply voltage of 5V, high efficiency is possible. As far as I can tell, it is mounted by Surface Mount. Electronic parts classified as Fanout Buffer (Distribution) are considered to be safety components. It is recommended to set the temperature to 0°C~85°C so the system can perform reliably. In order for it to function, a power source of 4.5V~5.5V V must be available. Surface Mount is placed within the way of this object. A pin count of 28 can be found on it. As a result, the output is ECL, PECL. It is operated using the 28 pins. This is a member of the family of MC10E411. The gadget belongs to the 10E family of clock buffers. The maximum supply voltage (Vsup) has been set to 5.5V. As a rule, the supply voltage (Vsup) should be kept above 4.5V for normal operation. There is a default setting of output 18. There is a -5.2V volt supply attached to it. It belongs to the 10E series of electronic parts. As a result of utilizing this gadget, NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V is also available.
MC10E411FNR2G Features
28 terminations
The operating temperature of 0°C~85°C degrees

MC10E411FNR2G Applications
There are a lot of ON Semiconductor
MC10E411FNR2G Clock Buffers & Drivers applications.

Clock signal duplication
Clock signal format conversion
Clock signal level shifting
High performance communication system
Data center
Cloud computing
Network
High speed industry
High-end consumer electronics
Data communication

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-LCC (J-Lead)
Number of Pins	28
Operating Temperature	0°C~85°C
Packaging	Tape & Reel (TR)
Series	10E
Published	2006
JESD-609 Code	e3
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	28
Type	Fanout Buffer (Distribution)
Terminal Finish	Tin (Sn)
Additional Feature	NECL MODE: VCC = 0V WITH VEE = -4.5V TO -5.5V
Voltage - Supply	4.5V~5.5V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	MC10E411
Output	ECL, PECL
Pin Count	28
Number of Outputs	18
Qualification Status	Not Qualified
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	-5.2V
Supply Voltage-Min (Vsup)	4.5V
Number of Circuits	1
Propagation Delay	680 ps
Turn On Delay Time	850 ps
Frequency (Max)	700MHz
Family	10E
Input	ECL, PECL
Ratio - Input:Output	1:9
Differential - Input:Output	Yes/Yes
Prop. Delay@Nom-Sup	0.75 ns
Same Edge Skew-Max (tskwd)	0.05 ns
Height Seated (Max)	4.57mm
RoHS Status	RoHS Compliant
Lead Free	Lead Free