MTCH105T-I/ML OverviewPackages are made with materials from Tape & Reel (TR). Surface Mount is needed to mount it on the PCB. 16-VQFN Exposed Pad is extremely popular in the electronic industry due to its low package cost. Providing the 2.05V~3.6V Supply Voltage ensures the device's normal operation. There are inputs of Up to 5. In standard grade applications, it is classified as Type Buttons. You should keep it at -40°C~85°C at all times when it is operational. Due to its high cost-down performance ratio, the -- Series provides the best value on the market. The current supply for this system is provided by 80mA. Part resolution is --. In LED drivers, channels Up to 5 are used. It is set to 80mA for its supply current. The structure is constructed by using terminations of 14. The gadget's main component is characteriMTCH105ed by the number MTCH105. In all cases, the component is powered by a 3V-volt supply. There must be more voltage present in the supply, Vsup, than volts consumed, 2.05V. The supplier device comes in package 16-QFN (4x4). The Supply Voltage (Vsup) reaches maximum value when 3.6V is reached. During reflow, 260 is the peak temperature. Over the 5 channel, data is transmitted. In addition to the 16 pin, there are some other uses as well. There is a 3.6 V voltage required for its operation. The subcategory Sensors can be used to categoriSensorse it.
MTCH105T-I/ML Features16-VQFN Exposed Pad package
Up to 5 LED driver channels
16 pins
Sensors subcategory
MTCH105T-I/ML ApplicationsThere are a lot of Microchip Technology
MTCH105T-I/ML Capacitive Sensors applications.
Material Stack Height
Level Sensor for Liquids, including Conductive ones such as Detergent, Soap, and Ink
Collision Avoidance
Rain, Fog, Ice, Snow Sensor
Automotive Door and Kick Sensors
Compact Capacitive Keyboards
Remote Control Trackpads
Appliances
Navigation devices
Kiosks and POS terminals
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Surface Mount | YES |
| Supplier Device Package | 16-QFN (4x4) |
| Number of Terminals | 14 |
| Mounting Style | SMD/SMT |
| Supplier Package | QFN |
| Maximum Operating Temperature | + 125 C |
| Minimum Operating Temperature | - 40 C |
| Manufacturer | Microchip |
| Brand | Microchip Technology / Atmel |
| RoHS | Details |
| Package | Tape & Reel (TR);Cut Tape (CT);Digi-Reel®; |
| Base Product Number | MTCH105 |
| Mfr | Microchip Technology |
| Product Status | Active |
| Dimensions | 4 mm L x 4 mm W x 0.9 mm H |
| Package Shape | SQUARE |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | -- |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | Buttons |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.39.00.01 |
| Subcategory | Sensors |
| Voltage - Supply | 2.05V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MTCH105 |
| Pin Count | 16 |
| Termination Style | SMD/SMT |
| JESD-30 Code | S-PQCC-N16 |
| Operating Supply Voltage | 3.6 V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Temperature Grade | INDUSTRIAL |
| Supply Voltage-Min (Vsup) | 2.05V |
| Number of Channels | 5 |
| Interface | Open Drain |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 80mA |
| Current - Supply | 80mA |
| Number of Inputs | Up to 5 |
| Seated Height-Max | 1 mm |
| Resolution | -- |
| Product Type | Touch Sensors |
| Sensor Type | Controller |
| Screening Level | TS 16949 |
| Proximity Detection | Yes |
| LED Driver Channels | Up to 5 |
| Product Category | Capacitive Touch Sensors |
| Length | 4mm |
| Height Seated (Max) | 1mm |
| Width | 4mm |
| Height | 0.9 mm |
| RoHS Status | ROHS3 Compliant |
MTCH105T-I/ML Datasheet
+8613715157867