SN74GTLP817PWR Overview
There is an embedded version of it in package 24-TSSOP (0.173, 4.40mm Width).Cut Tape (CT) is the packaging method.This output uses Tri-State, Inverted.Translator type Mixed Signal is assigned to this electrical device.Level translators is mounted according to the Surface Mount method.There is Bidirectional channel type for this electrical device.Level translators is -40°C~85°C TA at the operating temperature.Due to its superior flexibility, it uses 2 circuits.0 terminations are used to end transmission lines.A series of related parts can be derived from the base part number 74GTLP817.There is a voltage supply of 3.3V which powers the device.With 24 pins, it is equipped with a minimal number of connections.Level translators belongs to the series 74GTLP.With 24 pins, it is designed.Level translators is designed wLevel translatorsh 6 bLevel translatorss.Voltages up to 3.45V can be supplied.A minimal voltage of 3.15V is needed to operate it.Surface Mount is used for mounting.There are 1 channels.In this case, the logic IC is BUS DRIVER.2 terminations are used as the methods of ending a transmission line with a device that matches the line's characteristic impedance.Due to the 50mA output current, it provides maximum design flexibility.A high efficiency supply voltage should be maintained at 3.3V.In this case, the frequency is 175MHz.
SN74GTLP817PWR Features
24-TSSOP (0.173, 4.40mm Width) package
2 circuits
24 pin count
74GTLP series
24 pins

SN74GTLP817PWR Applications
There are a lot of Texas Instruments
SN74GTLP817PWR voltage translators & level shifters applications.

Telecom
GPIO
MDIO
PMBus
SMBus
SDIO
UART
I2C
Automotive
Personal computing

Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Number of Pins	24
Weight	89.499445mg
Operating Temperature	-40°C~85°C TA
Packaging	Cut Tape (CT)
Series	74GTLP
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3.3V
Frequency	175MHz
Base Part Number	74GTLP817
Pin Count	24
Output Type	Tri-State, Inverted
Operating Supply Voltage	3.3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	3.45V
Min Supply Voltage	3.15V
Number of Ports	2
Nominal Supply Current	10mA
Output Current	50mA
Number of Bits	6
Propagation Delay	4.2 ns
Logic Function	Translator
Output Characteristics	3-STATE
Logic IC Type	BUS DRIVER
Channel Type	Bidirectional
Output Signal	LVTTL
Translator Type	Mixed Signal
Input Signal	GTLP
Channels per Circuit	2, 6
Length	7.8mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free