TLE2072IDR OverviewIn the package, you will find a 8-SOIC (0.154, 3.90mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the J-FET-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. The op amp ic has an array of 8 pins on it. Op amp rates 1.1mV as input offset voltage. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~85°C , which is a good operating temperature. Using an 3.1mA supply current, this operational amplifier ics can be operated. You should keep the voltage gain at 106dB for the time being. A instrumentation amplifier like this has 2 circuits. The operating supply voltage of the buffer op amp is rated at 19V. The linear amplifier is packaged by using a TR axis. In this case, Excalibur™ represents the instrumentation amplifiers' series number.
TLE2072IDR Features8 Pins
supply voltage of 5V
106dB voltage gain
TLE2072IDR ApplicationsThere are a lot of Texas Instruments
TLE2072IDR Instrumentational OP Amps applications.
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | Excalibur™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | TLE2072 |
| Pin Count | 8 |
| Operating Supply Voltage | 19V |
| Power Supplies | +-5/+-15V |
| Number of Circuits | 2 |
| Operating Supply Current | 3.1mA |
| Nominal Supply Current | 3.9mA |
| Output Current | 48mA |
| Slew Rate | 45V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | J-FET |
| Common Mode Rejection Ratio | 70 dB |
| Current - Input Bias | 20pA |
| Voltage - Supply, Single/Dual (±) | 4.5V~38V ±2.25V~19V |
| Output Current per Channel | 48mA |
| Input Offset Voltage (Vos) | 1.1mV |
| Gain Bandwidth Product | 10MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 9400 kHz |
| Voltage Gain | 106dB |
| Average Bias Current-Max (IIB) | 0.01μA |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Low-Bias | YES |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.000175μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 9.4MHz |
| Max I/O Voltage | 6mV |
| Wideband | NO |
| Power | NO |
| Input Offset Current-Max (IIO) | 0.0001μA |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
+8613715157867